Sharp 1118H-CNC 11×18 CNC Toolroom Lathe W/ Anilam 4200T

$12,500.00

Here We Have:
Sharp 1118-CNC 11×18  CNC Toolroom Lathe W/ Anilam 4200T Control
Serial# 901003 New in 2001
Model 1118CNC
New Factory Specifications:
14-1/2 “ swing over bed ways, 12-3/8” swing over carriage, 6” swing over cross slide
Machine can use Gang type tooling or quick change tooling with tailstock
Positioning: +/- 0.000080”, repeatability: +/- 0.000040”, spindle run out 0.000050” TIR
Programmable spindle speeds up to 4,000 rpm
Constant Surface Speed
Alloy steel used on full bed-width bearing surface with dovetail design
Over size cross slide for extra rigidity
Oversized preloaded ball screw supported at both ends by angular contact bearings
AC servo motors for X and Z axis travel
Anilam Model 4200T 2 axes CNC control
Full CNC operation and complete manual operation
Manual operation offers 1 hand wheel 2 axes simultaneous movement for cutting taper
Make first part manually, subsequent parts automatically (teach-in function)
G-code or conversational programming
2 front mounted electronic hand wheels (MPG)
Pneumatic power 5C collet closer (standard)
Automatic lube system with low level alarm
CNC threading with multiple leads capability
5 HP spindle motor
“Hardinge-style” lathe
1118H CNC
CAPACITY:
Swing over bed 14.5″
Swing over carriage 12.37”
Swing over cross slide 6”
Tool Height 1/2″
Tooling Plate Size 7.5″ x 12″ (7.5″x15″ opt.)
Maximum X-Axis Travel 9″ (12″ opt.)
Maximum Z-Axis Travel 5″ (8″ opt.)
Feed Rate 200 ipm
Rapid Traverse 500 ipm
Carriage Base Movement (Manual) 13.4″
Drive System (X & Z Axis) AC Servo Drive
Linear Guideway System 25mm by NSK
Ballscrews 20 mm (3/4″), C3 Precision Ground
SPINDLE
Spindle Speed Range (Programmable) 100-4,000 rpm
Spindle Through Hole 1-1/16″
Spindle Collet, Chuck 5C
Spindle Motor 5HP
Accuracy
Positioning +/- 0.00008″
Repeatability +/- 0.00004″
Spindle TIR 0.00005″
CNC CONTROL
Anilam Model 4200T PC based,
3.5″ floppy drive, Conversational or G-code programming.
GENERAL
Electricity 220v, 60hz, 3 phase
Coolant Pump Motor 0.25 HP
Net Weight (approx) 2,700 lbs
Complete With:
All Available Manuals
Various Tooling
Buyers Responsibility to confirm accuracy of Machine

  • Model: 1118CNC
  • 1 Unit in Stock

Contact us for more information:

Category: